SDK Configuration Properties
Refer various SDK config properties applicable for WebAR SDK
Last updated
Refer various SDK config properties applicable for WebAR SDK
Last updated
WebAR SDK can be configured to select the mode (surface or marker tracking), customize the logo, style of the splash screen, UI screens (shown by SDK) etc using the following SDK configuration parameters.
These parameters can be used in different ways:
Adding as properties in javascript object window.WEBAR_SDK_CONFIG. A separate script having this object defined has to be included before loading the SDK <script> tag.
It is supported only from WebAR SDK v1.1.0-beta onwards
Example:
webar-sdk-config.js
index.html :
Adding as html attributes to the <script> tag in which the WebAR SDK js file is loaded.
Adding as a URL search params in the SDK script tag url.
Only the license-key property can be passed via URL search params. Passing other properties via URL will not work.
It is supported only from WebAR SDK v1.1.0-beta onwards
Example:
If an attribute is present in both the WEBAR_SDK_CONFIG property and SDK script tag attribute then the WEBAR_SDK_CONFIG property takes higher priority.
Description
On iOS Safari browser, a Camera permission request notice is displayed before asking the user to allow access to the Camera. This attribute changes the background color of the notice alert dialog.
Example
Description
On iOS Safari browser, a Camera permission request notice is displayed before asking the user to allow access to the Camera. This attribute changes the border color of the notice alert dialog.
Example
Description
On iOS Safari browser, a Camera permission request notice is displayed before asking the user to allow access to the Camera. This attribute changes the border thickness of the notice alert dialog.
Example
Description
On iOS Safari browser, a Camera permission request notice is displayed before asking the user to allow access to the Camera. This attribute changes the border radius of the notice alert dialog.
Example
Description
On iOS Safari browser, a Camera permission request notice is displayed before asking the user to allow access to the Camera. This attribute changes the border radius of the OK button in the notice alert dialog.
Example
Description
On iOS Safari browser, a Camera permission request notice is displayed before asking the user to allow access to the Camera. This attribute changes the font size of the text in the notice alert dialog.
Example
Description
On iOS Safari browser, a Camera permission request notice is displayed before asking the user to allow access to the Camera. This attribute changes the height of the notice alert dialog.
Example
Description
On iOS Safari browser, a Camera permission request notice is displayed before asking the user to allow access to the Camera. This attribute changes the width of the notice alert dialog.
Example
Description
On iOS Safari browser, a Camera permission request notice is displayed before asking the user to allow access to the Camera. This attribute changes the button color in the notice alert dialog.
Example
Description
On iOS Safari browser, a Camera permission request notice is displayed before asking the user to allow access to the Camera. This attribute changes the button height in the notice alert dialog.
Example
Description
On iOS Safari browser, a Camera permission request notice is displayed before asking the user to allow access to the Camera. This attribute changes the button text color in the notice alert dialog.
Example
Description
On iOS Safari browser, a Camera permission request notice is displayed before asking the user to allow access to the Camera. This attribute changes the camera permission button text in the notice alert dialog.
Example
Description
On iOS Safari browser, a Camera permission request notice is displayed before asking the user to allow access to the Camera. This attribute changes the camera permission text in the notice alert dialog.
Example
Description
On iOS Safari browser, a Camera permission request notice is displayed before asking the user to allow access to the Camera. This attribute changes the text color in the notice alert dialog.
Example
Description
On iOS Safari browser, a Camera permission request notice is displayed before asking the user to allow access to the Camera. This attribute changes the motion sensor permission button text in the notice alert dialog.
Example
Description
On iOS Safari browser, a Camera permission request notice is displayed before asking the user to allow access to the Camera. This attribute changes the motion sensor permission text in the notice alert dialog.
Example
Description
When SDK and A-Frame components with webar-* attributes are loaded, the AR experience starts automatically by default. In case the AR experience has to be started only after an event or user intervention, then auto-init attribute can be set to "false".
If auto-init="false" is assigned, the WEBARSDK.Init() method has to be called to start the WebAR experience. Please note that auto-init is associated with initializing the sdk core whereas auto-start enables the user to control when to start the tracking in the app.
Example
Description
It enables auto marker detection so that user doesn't have to manually click the scan button, rather it detects automatically when it recognises a marker.
If auto-marker-detection="true" is assigned, the scan button disappears from the phone screen during marker tracking and it starts scanning automatically.
Example
Description
User can change the default scan instruction for auto marker detection, i.e. when auto-marker-detection sets to 'true'.
Default text for scan instruction is "Look for a marker to scan..."
Example
Description
User can change the default scan instruction when marker is detecting i.e. recognises a marker image.
Default text for scan instruction while detection is "Detecting..."
Example
Description
User can change the default scan instruction when phone is idle
Default text for idle instruction is "Move around to look for a marker"
Example
Description
User can change the default scan instruction when desktop camera view is idle i.e no valid marker is detected. If no valid marker is detected within 5 minutes, user has to reload the page to start detection to work again.
Default text for idle instruction is "Reload to detect a marker"
Example
Description
Changes the css style of scan instruction text element.
Example
Description
User can change css style of scan instruction html element.
Example
Description
User can change the display style of auto scan html element
Example
Description
When sdk and A-Frame components with webar-* attributes are loaded, the AR experience starts automatically by default. In case the AR experience has to be started only after an event or user intervention, then the auto-start attribute can be set to "false".
If auto-start="false" is assigned, the WEBARSDK.StartTracking() method has to be called to start the WebAR experience/tracking. Please note that auto-init is associated with initializing the sdk core whereas auto-start enables the user to control when to start the tracking in the app.
Example
Description
Changes the height and width of the logo image displayed in a desktop browser where the user is asked to scan the QR code or type the url in Android or iOS mobile browsers.
Example
Description
Changes the logo image displayed in a desktop browser where the user is asked to scan the QR code or type the url in Android or iOS mobile browsers.
Example
Description
To enable/disable tracking on the desktop browser. This will be useful while developing the marker tracking application on the desktop itself. It also works with the developer console's mobile simulator in Chrome desktop browser.
Right now only Marker tracking is supported on the desktop browser.
When set to "false", tracking is disabled on the desktop browser and the default qr code page is seen.
When set to "true", tracking is enabled on the desktop browser and the camera view is seen.
Default value is "false".
Also by default the camera view displayed is a mirrored image of the real world. To enable/disable this mirroring see enable-mirroring-on-desktop attribute for more details.
Example
Description
To enable/disable mirroring of the camera view displayed on the desktop browser when enable-tracking-on-desktop is set to "true".
When set to "false", mirroring of the camera view is disabled on the desktop browser.
When set to "true", mirroring of the camera view is enabled on the desktop browser.
Default value is "true".
Example
Description
To enable/disable displaying the default snapshot camera icon.
When set to "true", a camera icon is displayed at the bottom the screen. On clicking it, user can take a snapshot of the experience and then see the preview of the snapshot to download it.
When set to "false", camera icon is not displayed. In this case, a custom snapshot UI can be implemented using WEBARSDK.TakeSnapShot() API.
Default value is "false".
Only for Playcanvas! To get the snapshot API to work correctly in Playcanvas rendering engine, enable Preserve Drawing Buffer flag. Go to Playcanvas Project Editor, then navigate to project SETTINGS > RENDERING tab and make sure "Preserve Drawing Buffer" is checked.
Example
Description
The gesture-rotation-speed
attribute determines the responsiveness of the AR object's rotation to user gestures. It modulates how quickly the object turns in response to user input:
A higher value results in a more rapid rotation, allowing the object to spin faster with each swipe. This can be useful for scenarios where quick, broad movements are desired.
A lower value yields a slower, more precise rotation, granting the user finer control over the object's orientation. This setting is ideal for detailed adjustments and nuanced interactions.
The gesture-rotation-speed
attribute is functional only when the webar-ux-control
entity in A-Frame or the corresponding mesh in Babylon.js has been appropriately configured and the userGestureRotation
is set to true
.
Example
Description
The gesture-scale-max
attribute specifies the upper limit for the scale factor applied to an AR object when users perform pinch-to-zoom gestures. This setting controls the maximum size the AR object can reach through user interaction, effectively capping the object's enlargement to ensure it does not exceed the intended proportions within the AR scene.
By configuring the gesture-scale-max
attribute, you can provide a safeguard against excessive scaling, maintaining the aesthetic and functional balance of the AR experience.
For the gesture-scale-max
attribute to take effect, it must be used in conjunction with the webar-ux-control
entity or mesh within your A-Frame or Babylon.js setup, respectively. Additionally, ensure that the userGestureScale
property is set to true
, allowing for user-initiated scaling gestures.
Example
Description
The gesture-scale-min
attribute sets the minimum allowable scale factor for an AR object within a single pinch gesture. It defines the least amount of scaling down that can be applied, ensuring that the object does not become too small to interact with or perceive after one pinch interaction. This constraint helps maintain the object's presence and usability within the AR scene.
Please note that this attribute accepts a value greater than 0 and less than 1, which represents the proportional size of the object relative to its initial scale. Setting it to 1 would maintain the object's original size, effectively disabling any scale-down action, as each scale-down gesture considers the object's current scale as the base factor of 1. Values less than 1 decrease the object's size proportionally, with smaller values allowing for more significant reduction.
This attribute is active when the webar-ux-control
entity or mesh is integrated into your A-Frame or Babylon.js application, with the userGestureScale
enabled. It's critical to ensure that the gesture-scale-min
value is set appropriately—above 0 and below 1—to facilitate user scaling gestures without compromising the object's visibility or interaction quality.
Example
The hide-reset-button
attribute allows developers to control the visibility of a reset button within the AR interface. When set to true, this attribute hides or removes the reset button from the user interface, streamlining the experience by eliminating unnecessary elements. This can be particularly useful if the reset functionality is not required or if you wish to manage state resets through custom controls or interactions.
The visibility and functionality of the reset button are dependent on the webar-ux-control
element being properly configured with the stageCursorUX
attribute set to true
. If webar-ux-control
is not implemented or stageCursorUX
is set to false
, the reset button will not be present, rendering the hide-reset-button
attribute inapplicable.
Example
Description
To enable/disable the camera permission alert dialog(generated by the sdk) on iPhone devices before showing the iOS system request to access the camera.
When set to "false", A Camera and Motion permission alert is shown only during the first time the application is loaded on the browser.
When set to "true", A Camera and Motion permission alert is shown during the first time the application is loaded on the browser. After that for every load, only the Camera alert is shown.
The advantage of showing the camera permission alert during every load is to start the auto playback of the video(if any) in the AR experience. In iOS Safari browser, a video cannot be played automatically when the scene is loaded. Instead it has to be played only after a user interaction. With this camera alert interaction, the app can start and pause the AR scene videos (using the callback from SetCameraAlertCallback() API) and also starts the iOS system alert to access the camera. Once the tracking has started, the paused videos can be played programatically to look like it is auto-played.
The default value of this attribute is "true".
Example
Description
Changes the height and width of the warning symbol image displayed in the landscape warning screen, or any device/server communication error.
Example
Description
Changes the warning symbol image displayed in the landscape warning screen, or any device or server communication error.
Example
Description
Changes the loading progress bar/info type. If the value is "default", it shows the loading update in text like "Created 1 of 3 elements". It shows Blippar's default style. If the value is "circular", it shows a circular progress bar.
Example
Description
Changes the height and width of the circular logo in the loading splash screen.
Example
Description
Changes the circular logo in the loading splash screen.
Example
Description
Loads a custom splash screen. To create a custom splash screen, the user should create a function and pass the function as a string to the "on-load" attribute.
Example
Description
Changes the color of the dotted loading ring which runs indefinitely until the splash screen disappears.
Example
Description
Changes the size/scale of the dotted loading ring which runs indefinitely until the splash screen disappears.
Example
Description
Changes the color of the loading progress update ring.
Example
Description
Changes the thickness of the loading progress update ring.
Example
Description
Changes the size of the loading progress update ring.
Example
Description
To enable/disable the rendering of the 3D scene on the desktop without any tracking.
When the value is set to "true", the 3D scene is rendered as seen by the default virtual camera on the desktop browser (without tracking).
When set to "false", the default qr code page is displayed on the desktop browser.
Default value is "false".
Example
Description
Decides which rendering engine is to be used with the application
For playcanvas rendering-engine, fork the project from https://playcanvas.com/user/blippar
Example
Description
Changes the css display property of the scan button displayed during marker tracking i.e. when webar-mode="marker-tracking". To make it invisible set it to "none" else "block".
Example
Description
Changes the height and width of the scan button displayed during marker tracking i.e. when webar-mode="marker-tracking".
Example
Description
Sets the height and width of the image displayed in the scan button displayed during marker tracking i.e. when webar-mode="marker-tracking".
Example
Description
Sets the image of the scan button displayed during marker tracking i.e. when webar-mode="marker-tracking".
Example
Description
Sets the SVG transform property (e.g. translate(), rotate() etc.) of the image displayed in the scan button displayed during marker tracking i.e. when webar-mode="marker-tracking".
Example
Description
Sets the x and y coordinates of the image displayed in the scan button during marker tracking i.e. when webar-mode="marker-tracking". The x and y position of the image is the top left position, relative to the viewport of the origin of the element i.e the scan button. Use scan-btn-img-transform attribute's translate() method to position the image to the centre.
Example
Description
Changes the text below the scan button displayed during marker tracking i.e. when webar-mode="marker-tracking".
Example
Description
Changes the css style of the text below the scan button displayed during marker tracking i.e. when webar-mode="marker-tracking".
Example
Description
Sets the color of the progress foreground circular bar displayed around the scan button during marker tracking i.e. when webar-mode="marker-tracking".
Example
Description
Sets the x and y coordinates of the centre of the progress foreground circular bar displayed around the scan button during marker tracking i.e. when webar-mode="marker-tracking".
Example
Description
Sets the radius of the progress foreground circular bar displayed around the scan button during marker tracking i.e. when webar-mode="marker-tracking".
Example
Description
Sets the SVG transform property (e.g. translate(), rotate() etc.) of the progress foreground circular bar displayed around the scan button during marker tracking i.e. when webar-mode="marker-tracking".
Example
Description
Sets the x and y coordinates of the centre point of the progress background circle displayed around the scan button during marker tracking i.e. when webar-mode="marker-tracking".
Example
Description
Sets the radius of the progress background circle displayed around the scan button during marker tracking i.e. when webar-mode="marker-tracking".
Example
Description
Sets the SVG style of the progress background circle displayed around the scan button during marker tracking i.e. when webar-mode="marker-tracking".
Example
Description
Enable or disable displaying the default Hand with phone animation guide, which instructs the user to move the phone left and right to detect a surface.
Example
If the default Hand with phone animation guide is disabled by setting show-guide-view animation to false, it is necessary to display a developer-made surface detection guide. Without this the user will not be aware of the need to view a surface and move the phone left to right to detect the surface. To control when to show and then hide a custom Hand with phone animation guide, use WEBARSDK.SetGuideViewCallbacks(startGuideViewCallback, stopGuideViewCallback)
Description
Sets the custom animation URL for hand guide animation of surface tracking. Please note that it only supports lottie animations json format.(https://lottiefiles.com)
Example
Description
To show/hide a "Try on Mobile" button displayed on the desktop browser. On clicking this button, it shows the QR code which can be scaned from the mobile device to load the application. This can be useful when render-scene-on-desktop attribute is set to "true".
Default value is "false".
Example
Description
By default, sdk assumes Static-Camera-With-A-Moving-Stage i.e. 'static-camera' = 'true'. However, it can be changed to Moving-Camera-With-A-Static-Stage by setting 'static-camera' = 'false'.
Example
Description
Changes the background color of the loading splash screen, landscape warning screen or any device/server communication error.
Example
Description
Replaces the default text shown in the landscape warning screen.
Example
Description
Changes the text color of the landscape warning screen, or any device/server communication error.
Example
Description
Decides whether to run the WebAR SDK in Surface Tracking or Image/Marker Tracking mode.
Example
Without Lazy Mode
With Lazy Mode
For PlayCanvas customization, kindly use the following config files which can be found at playcanvas/config folder in the downloaded SDK zip file:
webar-sdk-config-surface.js
webar-sdk-config-marker.js
These files have to be modified and hosted on a separate server (say my-server.com) and the url has to be overwritten in the Playcanvas project.
Login to Playcanvas and navigate to Settings> External Scripts > first url entry as shown below and replace the first url with your custom config url.
Due to the limitations in the playcanvas editor, the configuration properties cannot be directly modified or added in the editor and will need to be added in the above mentioned manner.\
Rendering Engine | Description |
---|---|
Supported Values- webar-mode | Description |
---|---|